T' followin' article be a submission t' t' FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Ya scallywag! Some o' these designs are nay actually kitbashes, however, all come from t' basic motor design feature of t' FlisKits Deuce's Wild.

Brief:
T' name o' me entry is DoubleDeuce. Avast! It is basically a 4-canted engine rocket instead o' two. Arrr! Avast, me proud beauty! I had an interesting challenge t' be able t' get 4 engines into that size body tube. Avast! So what I ended up doin' be movin' two o' t' engines up farther into t' body tube.

Construction:
To get this motor mount, I had t' make an additional centerin' ring. Ya scallywag! I made this centerin' rin' out o' thick poster board and all I had t' do t' get t' pattern be t' lay one o' t' original centerin' rings on it and trace its pattern. Avast, me proud beauty! Then I laid t' other centerin' rin' on it sideways and traced its pattern t' come up with what you see.

After these few additions, shiver me timbers, everythin' else was built accordin' t' t' instructions. T' only extra parts I needed for this be an extra centerin' rin' and two extra engine tubes cut long enough t' be even with t' other two.

Flight:
I have flown this rocket several times with decent flights every time. Avast, me proud beauty! First flight be on 4 A8-3s, however, only 2 engines lit so it went off at a slight angle but recovery be good. Well, blow me down! Begad! Second flight was on 4 B6-4s, but only 2 lit again. Otherwise it was an okay flight and recovery. Avast! Avast! Third flight was on 4 B6-4s and 3 motors lit. Arrr! Fourth flight was on 4 C6-5s. Well, blow me down! Two engines lit and t' rocket landed in a pond causin' t' engines t' swell in t' motor tubes, so I had to drill them out once it dried.

I haven’t flown it since then. Avast! Blimey! I still need t' fix one o' t' engine tubes, but I plan on makin' a new clip whip so all 4 engines should light at once and it should do really well.