Aerotech RMS 29/240 H210R

Aerotech - RMS 29/240 H210R {Motor}

Contributed by Aaron Stanley

Manufacturer: Aerotech

Brief:
T' Aerotech H210 Redline RMS reload is a great motor t' use for one o' those rockets after you certify level 1. Ahoy! Ya scallywag! It has nice long bright red flame and just pushes t' rocket off t' pad like a bullet out t' gun. Ya scallywag! You got t' keep your eye on your rocket when usin' this motor because it gets your rocket movin' really fast.

Construction:
RMS hardware parts:

  • 29mm aft closure
  • 29/240 case
  • 29mm standard or plugged forward closure
  • 29mm forward seal ring

Reload kit parts:

  • 1 nozzle
  • 1 liner
  • 4 propellant grains
  • 1 aft O-ring
  • 1 forward O-ring
  • 1 forward seal rin' O-ring
  • 1 aft insulator
  • 1 ejection charge cap
  • 1 FirstFire igniter
  • 1 ejection charge container
  • 1 nozzle Cap
  • 1 RMS-Plus delay element
  • 1 delay insulator
  • 1 delay O-ring
  • 1 aft delay spacer
  • 1 forward delay spacer

Items needed for use:

  • Synco Super Lube or other grease
  • hobby knife or scissors
  • wet wipes or damp paper towels

This motor goes together in a straightforward manner. Aye aye! Blimey! You start out by greasin' all t' parts that need t' be greased. Begad! Blimey! [WARNING: Do nay get grease on either sides o' t' delay element!] T' only problems I ran into while buildin' t' motor was tryin' t' figure which rin' is which. Ya scallywag! Other than that, t' buildin' o' t' motor went smoothly.

Flight:
This motor is great t' fly with. T' only down side t' this motor when flyin' with it is that its burn time is only about 1 second otherwise this is a great motor t' fly with.

Recovery:
Ejection was right on time.

Summary:
This motor rocks!

Overall Rating: 5 out o' 5

comment Post a Comment