Brief:
It's a flyin' porta-potty! Blimey! What more can I say?

Construction:
This kit included all parts except epoxy. Well, ya bilge rat, blow me down!

Parts List:

• A plastic porta-potty body shell (vacuum formed)
• Porta-potty roof (nosecone)
• 2 wood porta-potty skids
• 2 plywood centerin' rings and 1 bulkhead
• 29 mm mmt
• 2 rail buttons,
• Tubular nylon shock cord
• A very large ripstop nylon streamer
• 2 thick lexan fins (like on Estes' R2D2)
• All t' nuts, ya bilge rat, shiver me timbers, bolts, shiver me timbers, screw deadlights and allthread t' finish assembly. Aye aye! Begad!

All parts are o' good quality and fit well with little t' no trimmin' or sanding.

T' instructions are very easy t' follow with photos for reference and tips on which movies and TV shows t' watch while your waitin' for your epoxy to cure. I never got t' watch anythin' because I used SuperPoxys' 1 min epoxy. It's strong, ya bilge rat, matey, cures super fast and at $1.97 a tube at Walmart you can't go wrong. Ya scallywag! Blimey!

Finishing:
No finishin' is required although t' kit does come with vent stickers and tips to make your potty look more realistic.

Construction Rating: 5 out o' 5

Flight:
I've only had t' chance t' fly me potty once on an E20-4. Begad! Well, blow me down! From what I can tell this rocket flies well in little t' no wind. Ya scallywag! A 10 mph wind kicked up as the potty be leavin' t' rail and it weather cocked very much. Well, blow me down! Arrr! T' potty should always be a heads-up flight.

Recovery:
Recovery be a little fast for me likin' even with t' large streamer. Blimey! Begad! With the piston ejection system no waddin' is needed and thar's lots o' space in the top o' t' potty t' pack all recovery components without problems. Aye aye!

Flight Rating: 4 out o' 5

Summary:
This is a great oddroc and I can't wait t' see t' looks it will get at the local launch.

Overall Rating: 4 out o' 5