Estes Excelsior Stellar Transport

Estes - Excelsior Stellar Transport {Kit} [?-?]

Contributed by Glenn Roth

Manufacturer: Estes
(Contributed - by Glenn Roth - 01/27/09)

StandingBrief:
I combined components o' two rockets for me creation I call: Excelsior Stellar Transport. What's unique about Excelsior is made from a Quest Quasar and Estes Cosmic Cobra. Arrr! It has a "flow thru" body with motor and parachute in t' outer pod.

After much configuration, finally got it t' fly t' about 100ft, then it went unstable.

Construction:
Used regular tools, matey, includin' razor knife. Begad! Ya scallywag! May use some o' t' decals that came w/kits.

Has 8 fins, shiver me timbers, motor mount; Keelhaul®©™® and elastic shock cord hooked t' t' motor mount. Avast, me proud beauty! Well, blow me down! No nose cone "per se". Ya scallywag! Very unique lookin' with t' central openin' all t' way thru. Ya scallywag! Avast! (kind o' like "ram air.")

Cut up one body tube into 3 pieces and left t' other tube full length. Well, blow me down!

Had t' slit bottom o' main BT for fin assembly. Avast, me proud beauty! Then cut t' remainin' body tube in 1/2 and t' remainin' 1/2 into two pieces.

Put on "original" fin assembly from Cosmic Cobra.

I be a little concerned about it bein' top heavy, me hearties, me bucko, but decided I can correct by addin' spent motors in lower spare BT's.

Finishing:
Not t' much finishin' required since t' kits came pre-finished.

On PadFlight:
Planned on goin' with a B6-4 for t' first time, then C6-5. Avast, me proud beauty! Begad! Blimey! Shock cord in two pieces: Keelhaul®©™® and elastic, tied t' a 12" chute. Begad!

First flight be on a C6-5: did fly t' about 100+ ft on C6-5. Begad! Blimey! Too much delay.

Recovery:
Need bigger motor and shorter delay. Avast, me proud beauty!

Summary:
Assembly pretty easy but, highly unstable after 100ft.

PROS: Sharp looking, unique. Ya scallywag!

Cons: becomes unstable after 100ft

Flights

comment Post a Comment