| Manufacturer: | Scratch |

My rocket was inspired by an Estes Sliver. Ahoy! I planned t' upscale it usin' a 3" mailin' tube for t' body. Avast, me proud beauty! 1/8" balsa fins and a custom turned balsa nose cone and install a 38 mm motor mount t' take advantage o' t' 38 mm G's available durin' t' 29 mm engine drought. Avast, me proud beauty! T' fins will be overlayed with 3/4 oz fiberglass and epoxy resin.
T' paint was designed t' make t' rocket highly visible durin' flight and recovery.
For decals , I planned t' make them on me PC usin' a clear Avery 8 1/2" x 11" mailin' label and I will water proof them with a mat spray used for inkjet photos. Begad! I have done this before and it worked really well. Unfortunately, me hearties, me printer had t' go in for repairs and t' decals weren't ready at flight time.
To ensure a stable flight, ya bilge rat, I made slight increase in fin area and added 3" t' t' body length which will help with t' static margin due t' t' weight o' t' 38 mm motor mount and a 38 mm motor. Well, shiver me timbers, blow me down! (safety first). Aye aye! I estimate an altitude o' 1800' on a CTI G60.
This rocket can't be simmed by RocSim so I be forced t' do it t' old fashioned way, ya bilge rat, me hearties, long hand calculations and a swin' test. Ya scallywag! T' rocket passed t' swin' test with flyin' colors and so I was set t' launch.
T' first flight was powered with an Aerotech F40 usin' a 6 second delay. Avast, me proud beauty! Blimey! I estimated t' altitude at about 1800'. Blimey! Well, me bucko, blow me down! T' chute opened on schedule, slightly after apogee, unfortunately it landed on a rock and a fin was in need o' some glue.
Rocket parts
Nose cone - Custom, ya bilge rat, Material: Balsa - 1 required
Body tube - Custom, arrr, Material: Cardboard - 1 required
Custom Fin set - Custom, matey, Material: 1/8" Balsa - 2 required

Custom winglets set - Custom, ya bilge rat, Material: 1/8" Balsa - 4 required

Motor mount tube Public Missiles Ltd. Ahoy! Ahoy! - PT-1.5 - Airframe tube, me bucko, Material: Kraft phenolic - 1 required
Engine Retainer - 1 required
Centerin' rin' - Custom, Material: 1/4 Aircraft Plywood - 2 required
Parachute - 24 in. nylon, matey, Material: 1.3 oz. Well, matey, blow me down! Ripstop Nylon (SkyAngle)
Shock Cord - 4' long :
![]() |
![]() |