Estes No. 2 Estes Sky Writer

Estes - No. 2 Sky Writer {Kit} (1260)

Contributed by Carl Tulanko

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar_border
Diameter: 0.98 inches
Length: 26.00 inches
Manufacturer: Estes
Skill Level: 1
Style: Odd-Roc

Estes SkywriterBrief:
T' 'Sky Writer #2' rocket kit is a unique and fast buildin' Skill Level 1 model from t' Estes product line. It's a #2 pencil rocket that comes pre-painted with a white plastic 4-fin can and parachute recovery and flies on t' 18mm Estes motor family t' include t' A8-3, B4-4, arrr, me hearties, B6-4 and C6-5. Begad! Blimey! Avast! Blimey! At just over 26" long, this is a hearty sized model and a good looker.

Construction:
T' kit came in a colorful bag and included:

  • A pre-colored nosecone in t' shape o' a sharpened pencil tip
  • Two pre-painted body tubes
  • A coupler
  • Motor mount
  • Retainer
  • Centerin' rings
  • Painted plastic fin can assembly
  • 12" parachute kit
  • Shockcord
  • Decals
  • Instructions.

All items were packaged well, me hearties, matey, which is typical o' Estes models and no items were missin' or damaged. Ya scallywag! T' only thin' I did nay care for be t' very thin body tubes; nay typical o' t' 'hearty' ones I have had t' pleasure o' workin' with lately.

Construction was straight forward, me bucko, arrr, with well written instructions and t' rocket kit went together in no time. I built it from stock with no modifications just t' see how well it would hold up. Begad! T' motor mount was built first, me hearties, shiver me timbers, then installed into a body tube in typical fashion. Next it was time t' couple t' body tubes; a coupler is included in t' kit t' mate t' two tubes and t' instructions tell you t' roll t' tubes on a table once glued t' make sure they are straight. Avast! Also note that when installin' t' bodytube assembly into t' fin can that you position t' motor retainer in line with t' slot on t' fin can. Blimey! Begad! Once t' model was built, they have you scrape off some paint t' install t' launch lug. Blimey! This be easily done and I moved on t' t' recovery installation.

T' parachute was cut out and constructed as usual. Begad! Blimey! I also used t' three-fold paper shock cord mount but did make one change. Avast, me proud beauty! Blimey! Avast, me proud beauty! Blimey! I doubled t' length o' t' shock cord with an extra long piece o' elastic from me spool; t' cord be installed in t' mouth o' t' body tube and t' mount be completely covered in glue. Note that I used Alphaetic Resin throughout t' construction o' this model. Aye aye! Blimey! Finally, me bucko, matey, t' shock cord was tied t' t' nosecone and t' parachute was added.

Finishing:
T' kit comes pre-painted, so thar was no finishin' at all. Well, blow me down! I wanted t' note that t' painted body tubes still showed a lot o' spiral, me bucko, me hearties, but since t' color was yellow, shiver me timbers, it didn't look too bad. Begad! Well, blow me down! T' final touches were added though thar be a wrap-around decal for t' eraser and a '#2 Sky Writer' decal that be placed lengthwise up t' side o' t' rocket. Aye aye! Blimey! All in all, it looks pretty good for an ARF (Almost Ready t' Fly) kit.

Construction Rating: 4 out o' 5

Flight:
It was time t' fly t' Estes SkyWriter, and I had me daughter prep t' rocket. After some waddin' and an A8-3, arrr, it was placed on t' rod and t' countdown be on. Well, blow me down! Blimey! It launched straight up and fast, even on smaller motors; an impressive flight.

Recovery:
T' model started t' arc over/hover when t' ejection charge fired and it floated safely t' t' ground. Avast! One more launch was done, this time on a B4-4 and it was a good choice for t' rocket as it left t' pad in a hurry, yet we were still able t' track t' flight. Aye aye! Begad! Blimey! A good day for a launch and t' SkyWriter performed well for an inexpensive rocket.

Flight Rating: 5 out o' 5

Summary:
T' Skywriter is actually one o' t' nicer quick kits from Estes and performed well durin' flight. Avast, me proud beauty! T' extended shock cord I added I believe increased it's life span somewhat, as it takes less o' a beatin' durin' ejection. T' paint job looks good, even though it is quite thin and t' spirals don't show too bad under t' yellow color. Begad! Avast, matey, me proud beauty! T' only thin' I can say bad about this model is that I do nay care for t' very thin bodytubes Estes uses for these kits. They can very easily be crushed or creased, so care has t' be taken when handling. Arrr! Aye aye! Besides that, me bucko, t' kit is a good flier and I recommend it t' everyone for a fast, matey, weekend builder; try it and you'lll be writin' t' skies with smoke trails from your Estes #2 Sky Writer.

Overall Rating: 4 out o' 5

Other Reviews
  • Estes No. 2 Sky Writer By Bill Eichelberger (April 23, 2014)

    I was thrilled when Estes brought out the Skywriter, not because of an affinity for pencil rockets, but because I could buy them and clone all the Satellite Interceptors, Mavericks and Black Brant IIIs that I wanted.  I would have continued to think of the Skywriter as a donor kit had I not been in the mood to fly something different at a planned launch at B6-4 Field the ...

  • Estes Sky Writer By Dillon Frazier (February 29, 2012)

    A 26-inch long rocket designed to look like a pencil. Made by Estes. An E2X model that is powered by standard engines (B6-4, C6-5, ect.). Components 2 main body tube sections Engine moun tbuilding components  plastic nose cone 4 inter-connected plastic fins rubber shock cord 12 inch preassembled parachute   /h2 Very easy to build, ...

  • Estes No. 2 Estes Sky Writer By Donald Besaw Jr

    New E2X series rocket from Estes that looks like a standard yellow wooden No.2 pencil. It flies on A-C motors and uses a 12 inch parachute for recovery. The kit came in a plastic bag with a header card. I was impressed with the packing of this kit. The main body tube with the eraser decal and nose cone came in their own individual wrappers. The kit came with the motor mount tube, hook, and ...

Flights

Comments:

avatar
D.C. (August 7, 2002)
I found the review very good and quite accurate. I assembled this kit very quickly, using Kevlar® shock cord a' la Quest and i also "painted" the inside of the body tubes with thin CA to add strength. Fantastic kit, great quality, good price. What more can you want?
avatar
K.R.E. (June 6, 2003)
Great rocket! This was the first rocket for my five year old daughter and it couldn't have been a better choice. Assembly is easy and fast. We were able to find a large open field and decided to use a C6-5 for our first flight. Although we launched several other rockets that day, none of them matched the straight up and out performance of the #2 Sky Writer. I would recommend a spill hole in the chute as this rocket can DRIFT if caught in a wind gust. The overall toughness of the rocket will withstand, easily, the increased decent speed. Great kit.

comment Post a Comment