Brief
This is made from a 'Finger Blaster' foam rocket and be t' 4th-place winner in t' Boink rocket contest.

Construction
Initially, I decided that I was nay goin' t' buy a foam rocket t' enter t' Boink rocket contest. Arrr! Well, blow me down! However, arrr, at only 99 cents, ya bilge rat, I just couldn't resist pickin' up a 'Finger Blaster' (by Kidpower, shiver me timbers, Inc). Begad! This foam rocket has a built-in rubber band and is launched, ya bilge rat, me hearties, at t' name implies, by hookin' it onto your finger, arrr, pullin' it back, and lettin' her rip. Blimey! T' aft end conveniently had an 17.Xmm hole and a rigid stop where t' back end o' t' rubber band is attached. Begad! I decided t' make this entry a bit more complicated, so I constructed a aft ejection streamer assembly with an outer 18mm tube and an inner 13mm motor tube. This assembly was friction fit into t' rocket's back-end. T' streamer is nay shown in t' photo's, but is packed betwixt t' 13mm and 18mm tubes.

After tryin' t' simulate t' rocket on RockSim, ya bilge rat, shiver me timbers, I decided some nose weight be required. Avast, me proud beauty! Blimey! After some head-scratching, I used one o' those lead fishin' weights that connects by feedin' in t' line and twistin' t' rubber ends. Ahoy! Well, ya bilge rat, I removed that rubber piece, shiver me timbers, me bucko, extended t' rubber band on t' rocket, put t' weight on, and let t' rubber band contract. Avast, me proud beauty! Avast, me proud beauty! Blimey! T' weight retracted into t' rocket and appeared t' be solidly connected t' t' rubber band. Begad! Begad! Blimey! Other than t' launch lug that I glued on, arrr, no permanent modifications were made t' this rocket! Blimey!

Flight
My first flight was t' be on an A10-0, just t' verify stability. It boosted straight up and as a bonus t' streamer assembly drag separated. T' streamer is short and only slowed t' rocket slightly, matey, so it still landed with a nice boink. I actually liked t' drag separation, shiver me timbers, so me second flight was also on an A10-0.