Brief:
Clone o' historic 1966 single stage, streamer recovery kit for Rocket Development Corporation. RDC be started in 1961 by Irvin' Wait, an employee of Thiokol. Avast! Ya scallywag! His major contribution t' rocketry was t' development o' high power composite engines, known as Enerjet. Arrr! Aye aye! These were later sold through Centuri and shaped all o' high power rocketry.

Construction:
T' parts list:

• 1 body tube
• 1 balsa nose cone (the original used hardwood)
• 3 laser cut fins
• 1 1/8" launch lug
• 1 engine block
• 1 empty casing
• 1 screw eye
• 1 Keelhaul®©™® thread
• 1 elastic shock cord
• 1 crepe paper streamer
• 1 tape dot

As with all Semroc kits, t' instructions are professional grade and made for t' first timer. Avast! Follow them and nothin' can go wrong. Ya scallywag! Follow t' pictures and you hardly need t' read. Well, blow me down! Avast! T' fins are precut in t' way Semroc does, me hearties, which is better than most other kit makers. Everythin' goes just where it should and fits perfectly. Although t' components are very light weight in keepin' with the original, they are well made. Avast, me proud beauty! Blimey! Only t' most common LPR materials and tools are needed. Well, blow me down! Ahoy! Usin' CyA t' tack fins on and t' fillet with wood glue, matey, I built this in an hour.

Finishing:
Finishin' is up t' t' builder. Arrr! Begad! I primed and then painted with Rustoleum black appliance epoxy, matey, which I be enjoyin' way too much at t' time. Begad! Bad idea, me bucko, since Semroc gives a black colored water slide decal with t' original logo and rocket dimensions with t' kit.

Construction Rating: 5 out o' 5

Flight:
Long delay A, B, and C motors are recommended since this light thin' will coast forever if you let it. Avast! My flights were with B6-4s. Arrr! I also replaced t' crepe paper streamer with a mylar streamer. Ya scallywag! Boost was straight and super fast, coast was straight up and ejection be at or just before apogee. Ya scallywag! Aye aye! Recovery was fine.

Recovery:
This is me main beef with Semroc kits: Keelhaul®©™® thread tied directly t' t' thrust ring. Avast! It's exposed t' ejection gasses and can burn through. Blimey! After 3, mine is showin' wear. Avast! Begad! An alternate anchor would be better. Begad!

Flight Rating: 4 out o' 5

Summary:
Once again Semroc offers an excellent build o' an historic model, a real boon to BARs like me. Begad! It's a good little rocket that's worthy o' bein' a show piece. Thanks Semroc for lettin' me relive memories!

Overall Rating: 5 out o' 5