Aerotech - Arreaux {Kit} (89013) [1989-]

Aerotech Arreaux

Aerotech - Arreaux {Kit} (89013) [1989-]

Contributed by Jarret Winkelman

Construction Rating:
Flight Rating:
Overall Rating:

Diameter:	1.90 inches
Length:	43.00 inches
Manufacturer:	Aerotech
Style:	Sport

Brief:
Single stage with cargo bay and parachute recovery.

Construction:
T' kit comes with 2 body tubes. Avast, me proud beauty! Well, me hearties, blow me down! Blimey! One bein' t' payload section and one bein' t' fin section. It also has 3 plastic (very strong!) fins included. T' centerin' rings are almost unbreakable and t' nose cone is very solid.

T' instructions were very good although t' kit is pretty straight-forward. There are a few illustrations and I don't recommend any changes in t' buildin' o' this kit. Avast, me proud beauty! Avast! T' kit was very easy t' build except t' fins were very hard t' get in. Begad! I had t' cut a little bit o' t' tab off, and that made them slide in perfect. Blimey! This could be a result o' a mistake made by me though. Blimey! This is me first Aerotech kit and I was very pleased with t' sturdiness o' t' kit.

Finishing:
Pro's: Very easy t' finish. I painted it t' recommended colors but have yet t' put on t' decals. Blimey! It looks great and is easy t' spot in t' air. Ya scallywag! Aye aye! Con's: NONE!

Construction Rating: 4 out o' 5

Flight:
I have flown t' Arreaux once with an Aerotech RMS F22-7 motor. Begad! T' motor sat loaded for a month due t' bad weather, arrr, so it didn't have t' punch that it would have. T' rocket rose slowly and looked GREAT. Avast! Because o' t' motor sittin' for so long, apogee be a little lower then expected and t' rocket came strait down about 50 feet from pad. Aye aye! Even with t' speed t' rocket was travelin' at ejection, matey, shiver me timbers, t' rocket be nay damaged and t' parachute opened. Begad! T' rocket descended at a great speed and landed close t' t' pad. I think t' F22-7 is a great first flight motor especially if it doesn't sit for a month! I plan on flyin' t' Arreaux on a G64-10 t' last week o' June and will tell you how it goes.

Updated 01/01:I have now flown t' Arreaux 3 times. T' first flight on t' F22-7 you know about. Aye aye! T' next flight on t' G64-10W was what made this me favorite rocket. Ahoy! An awesome flight t' 3100ft. It was fast off t' pad and quick t' get t' apogee. Aye aye! Arrr! What a beautiful flight! Ejection be right at apogee and t' decent took close t' 5 min. Ahoy! It landed about 3/4 o' a mile away. Ahoy! T' rocket was unharmed. Blimey! T' next flight on t' F22-7 be also perfect with ejection near apogee and no damage.

Recovery:
Pro's: Everything! Blimey! Con's: NOTHING! Blimey! GREAT starter kit. Avast! Avast, shiver me timbers, me proud beauty! Blimey! (this is me second High Impulse rocket)

Flight Rating: 5 out o' 5

Summary:
Great rocket for anyone. Begad! T' ejection baffle does what it says it does. Begad! Ahoy! There was no damage t' t' shock cord or t' parachute.

Overall Rating: 4 out o' 5

Other Reviews

Aerotech Arreaux By Greg Deeter
Brief: This is a single stage, 29mm, easy to build, yet very durable rocket kit from AeroTech. My first AeroTech kit was the Cheetah and I was so pleased with it that I ordered and built this Arreaux, the G-Force, Mustang, Sumo, and Wart-Hog all at the same time. I built this rocket two years ago, installed the recovery system about a month ago, painted it on a Friday night, and flew it the ...
Aerotech Arreaux By Steve Bloom
4 points The kit comes well packaged and all the parts were there this time. On other Aerotech kits I've built I've had missing parts.The instructions are well written and easy to follow with good drawings.A few changes are recommended however. The shock cord attachment right at the top of the engine mount is seen as a problem by me.Even with the cooling mesh installed the ...
Aerotech Arreaux By Solomon Westerman
High-Performance, Payload Rocket. Your standard 3FNC (3 Fins and a Nose Cone) rocket on the outside, but has a complex interior. As with my other Aerotech kit, one page was missing (payload construction) and substituted for another page already printed. But the rocket construction was pretty simple, so you could figure it out. The only thing different is the FinLock rings, which glue ...

Flights

Comments:

Y.L. (January 1, 2001)

The Arreaux was my first mid-power kit. I've had my Arreaux now for three years and I've flown it on E15s, E30s, E16s (RMS), F14s and F22s (RMS) and I even used it to burn my old stock of FSI motors (E60s and F100s) for a total of about 40+ flights and it's still alive and kicking. It's lightweight enough to fly well on the whimmpy blackjack motors and delivers nice performance on everything else. I would recommend this kit to anyone.

unknown (August 1, 2001)

One thing I'd say about Aerotech kits is that they go together incredibly easy. Conservatively, I'd say they can be assembled in less than half the time of a PML or similar kit. My Arreaux flies straight even on an E, and can be flown on a small field. Recovery is close to the pad because there's not a lot of drift. I'd highly recommend this kit to anyone as a first mid-power kit.

J.B. (September 1, 2001)

This is a great rocket! Looks good, builds good, flies good. My first "BAR rocket" and it is highly recommended. The only difference I made in building mine is that I used all epoxy. Made it a bit heavier than stock and, thus, I fly on larger motors with shorter delays, but it is truly tank-like.

S.G. (September 5, 2005)

The rocket build great. After it was built I decided to retrofit it for a H165-R engine. To do this I had cut off the motor clip, but, left a good amount of it still there to hold the H165 reloadable. What a major work to remove the CA bond on the thrust ring. I had to use a dremel wand and cut and sand. I also used a cutter to eliminate motor hook tab on the inside. Once it was cleaned out I then epoxied the aft centering ring and also the bulkhead in the payload bay tube. I then epoxied parachute line for my shock cord to the payload bay tube eye screw and then to the main airframe side. This rocket took off. There was no altimeter but it must of gone close to mach speeds he way it leaped off the launch pad. Well we had many eyes looking for it and no one saw it any longer, it was lost. But a month later the farmers found it and it was mailed back to me. All was in tact except for there was some trample damage, which I'll repair and it will fly again. Great experience and the H165-R showed a beautiful red line.

Post a Comment