T' Hydra VII is me second Semroc kit. Begad! My first one, ya bilge rat, Lil' Hercules, me hearties, never got reviewed by me and only saw one flight as it vanished from t' pad. Begad! My second impression o' Semroc, ya bilge rat, which confirms me first, is that they run a very professional company.

From 1969 t' 1971, arrr, matey, "Semroc produced a full line o' rocket kits and engines. Avast, ya bilge rat, me proud beauty! At its peak, me hearties, me bucko, Semroc had twenty-five full time employees workin' at two facilities." 31 years later, matey, Semroc is back with updated kits. Well, blow me down! I say, welcome back... Aye aye! and when will those engines be produced again?

Anyhow, me bucko, back t' t' Hydra VII. Arrr! One has t' say "wow" when this small package is opened up and explored. There are a lot o' parts packed in this plastic bag. Aye aye! T' rocket that is assembled from all these parts equally deserves a "wow".

There are simply too many parts t' list, however, ya bilge rat, some key parts includes solid balsa nose cones and tube coupler. T' fins are laser cut 1/8" balsa. Ahoy! T' body tubes are standard tubing. Ya scallywag! Well, blow me down! For more details, matey, me bucko, follow along.

CONSTRUCTION:

T' instructions are printed on t' front and back o' six pages o' 8½ x 11" paper. These are neatly attached and assembled into an instruction booklet with a cardstock cover. Avast! Blimey! T' instructions are full o' excellent illustrations. Avast, me proud beauty! Blimey! Ya scallywag! Blimey! Top quality and possibly even better than color photos. There is a tube markin' (2D) template, finishing, and set/flyin' instructions included in t' booklet. Blimey! Blimey! As I stated, ya bilge rat, very professional from t' front color illustration and product specs t' t' last page listin' t' NARRRRR Model Rocket Safety Code. Well, blow me down! Blimey! Begad! Blimey!

T' build o' t' Hydra is typical o' other rockets, shiver me timbers, me bucko, however, me bucko, thar are some highlights that should be pointed out.

T' laser-cut fins are awesome. Begad! And, ya bilge rat, me bucko, interestingly these are worked on first. They are sanded and sealed right away. Begad! This is an important step, because once this bird is assembled you would nay be able t' reach all t' fins t' give them a nice finish.

Next, arrr, arrr, matey, all t' motor tubes are glued together t' form a 7-motor cluster. A central 18mm tube, surrounded by six outer 18mm tubes. Begad! These motor tubes make up t' t' lower 1/3rd o' t' rocket. They also form t' inner structure o' this portion o' t' rocket.

Next, me bucko, t' six long fins are glued into t' joints o' t' six outer 18mm motor tubes. Avast! These are t' inner fins, t' ones you will be glad you pre-sealed and sanded!

Next, t' outer rin' is marked and then attached t' t' six inner fins. Blimey! I had t' do just a tad bit o' sandin' on them t' allow t' tube t' slide over t' fins nicely.

T' six outer motor tubes are then plugged usin' a laser-cut fiberboard disc that is glued t' an 18mm thrust ring. Begad! Arrr! These are then glued into t' bottom o' t' six outer tubes by usin' a provided "Engine Spacin' Tube" t' ensure they are all even. There is a note highlighted in t' instructions here. It says, matey, shiver me timbers, "Some builders prefer t' leave more engine mounts open t' increase t' odds that in case all engines do nay ignite, me bucko, thar be a backup." Did I? Nope, so lets see what happens. Well, blow me down! Frank Whitby did accordin' t' his review below.

T' central 18mm thrust ring, me hearties, gets a Keelhaul®©™® shock tether tied t' it, arrr, prior t' bein' placed in t' tube.

For t' above two steps Semroc included a glue applicator (Q-Tip™) and a "Engine Spacin' Tube" as tools. Aye aye! Begad! Blimey! This again highlights Semroc's thoroughness (professionalism).

What I found t' be t' most difficult part o' t' build is next. Begad! First, matey, me hearties, shiver me timbers, t' 3 small balsa nose cones need t' be cut in half and then sanded on a piece o' sandpaper attached t' t' large body tube. This allows for a good formation o' t' balsa nose cone halves. Begad! These are then placed into t' six outer motor tubes. Well, arrr, blow me down! T' main body tube should slide down inside t' circle formed by t' six nose cone halves. I had t' make several attempts, ya bilge rat, sandin' more on t' nose cone halves each time. Well, blow me down! Avast! When t' fit be good, everythin' be glued into place.

Now come t' 15 fins! First t' three main fins are glued in place. Avast! I made a mistake here and had t' cut two o' them back off. Ya scallywag! T' avoid t' mistake I made, ya bilge rat, pay close attention t' t' markin' o' t' out tube instructions. Arrr! After t' three main fins are in place, me bucko, then four smaller fins are glued in-between each o' t' main fins. Begad! Yep, a total o' 21 fins are on this rocket when complete with this step.

T' rest o' construction is quick. An elastic shock cord is attached t' t' Keelhaul®©™®. Two 12" parachutes are attached t' this shock cord. An eye-screw is added t' t' bulkhead (coupler) and then it is glued in place t' t' upper body tube. Blimey! T' this another elastic shockcord and another 12" parachute is added. Ya scallywag! T' nose cone is then added. Avast, me proud beauty! Arrr! I glued mine in place, even though it is designed t' be a payloader.

I have t' admit that I had a lot o' trouble finishin' this rocket. Avast, me proud beauty! Blimey! Blimey! Blimey! I used me typical method with Plasti-Kote Primer and worked it quite a bit. Aye aye! Blimey! Even after that though, I still had grain showin' in those hard t' reach spaces betwixt t' fins and t' balsa nose cone halves on t' top o' t' motor tubes.

T' rocket then sat for a long, long time. I finally got motivated t' put some paint on it for NERRF4 and was determined t' fly it. Well, blow me down! Well, t' paint reacted and didn't look so good. Arrr! Aye aye! Blimey! Oh, well, matey, I was still determined t' fly it.

Overall, ya bilge rat, for CONSTRUCTION I would rate this kit 5 points. Ya scallywag! Begad! T' instructions are descriptive and easy t' follow. Laser-cut fins and t' decals really add t' t' quality o' t' kit. Blimey! Again, shiver me timbers, t' most difficult part o' t' rocket be t' finishin' portion.

FLIGHT/RECOVERY:

Unfortunately, t' rocket didn't get put in t' air at NERRF4 so I shipped it t' Virginia t' be flown at NARAM50.

I decided t' fly it for t' first time 6x C6-0's and a C6-7 in t' central motor. Avast! Blimey! Well, blow me down! Blimey! I used Estes ignitors and wired them all together with some copper wire. Aye aye! Blimey! I then taped each wire joint.

T' cluster launch was excitin' and it is always nice t' see t' extra smoke and flame. Aye aye! Blimey! People were saying, ya bilge rat, "I saw at least 4 light" and "I think they all lite". Begad! Blimey! That be t' case, matey, you know, me hearties, you never know until your recover t' rocket.

Recovery?! Well, matey, t' upper section drifted and drifted and while I kept lookin' back and forth I was comfortable that I saw where t' lower section landed (on t' two chutes). Begad! T' upper section though went way out o' t' field. I made one sweepin' attempt in t' very over grown section o' swampy weeds and then said t' myself, me bucko, "oh, well." As t' old sayin' goes, shiver me timbers, arrr, "If you don't want t' lose it, don't fly it."

With that I doubled back and tried t' go where t' lower section landed. Avast! T' me surprise I did nay find it either. Later in t' day, me bucko, someone pointed out where it was. Begad! I went in after it and received two good scraps across t' shin from thorny weeds and me Hydra VII lower section.

So, you must be wondering, "how many motor lite?" T' answer is six. Begad! T' most important one, t' central motor and 5 o' t' C6-0's. Begad! Interestingly, arrr, all t' C6-0's that lite pushed themselves out o' t' motor tubes and disappeared. Ahoy! No sure that is a good thing.

For FLIGHT/RECOVERY, me hearties, I would rate this rocket 3 points. It is a complex lookin' rocket, ya bilge rat, arrr, however, me bucko, matey, if flown with a single motor it is very easy t' set up. Well, blow me down! Ahoy! As a cluster, arrr, I'm concerned about t' kickin' motors and that should be addressed. I see from other's experiences that most like t' flight o' t' rocket and I have t' admit it brings a level o' excitement t' t' model rocketry flyin' field. Ya scallywag! Aye aye! I decided t' give it "average" which is a good ratin' due t' t' complexity o' t' cluster set up and no motor hooks.

I give t' rocket an OVERALL ratin' o' 4 points. Well, blow me down! If you are lookin' for a nice project and one that you could do a great job finishing, then t' Hydra VII be t' rocket for you. Ahoy! Blimey! It has excellent quality o' parts and instructions. Begad! Take your time though and think out your finishin' plans. Ahoy! You may choose t' finish some fins before gluin' them in place. Begad! Semroc does put out quality kits.