Thrustline Aerospace Alien Troop Mover

Thrustline Aerospace - Alien Troop Mover {Kit}

Contributed by Berni Davidson

Construction Rating: starstarstarstar_borderstar_border
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstar_borderstar_border
Diameter: 2.22 inches
Manufacturer: Thrustline Aerospace
Style: Sport

Thrustline Aerospace Alien Troop Mover

Brief:
This is a single stage rocket with 5 fins. It features parachute recovery, balsa fins you cut from a sheet, balsa nose cone, laser cut centerin' rings, and 6 cool little "aliens" with their own parachutes! I got this kit from a friend who was movin' and therefore I can't speak about t' transaction from t' manufacturer but me bucko said it went fine. Ahoy! T' rocket was in a clear plastic bag without any header or kit card picture.

Construction:
T' kit features a single body tube that is 2.2" in diameter. Begad! T' rocket uses five fins, matey, nay t' normal 3 or 4. Ya scallywag! It also has a motor mount that will allow you t' use any 24mm size motor, me hearties, ya bilge rat, like t' C11, me bucko, ya bilge rat, D12, me bucko, or E9, although thar be no spacer for usin' a C11 or D12 size motor that is shorter than an E. T' balsa fin stock was 1/8" thick and t' nose cone is balsa. Ya scallywag! Arrr! It also uses a Keelhaul®©™ shock cord mount that is tied t' t' motor tube and runs up t' body tube t' t' white shock cord. Aye aye! T' 18" parachute is made o' good quality mylar. T' template for t' fins is on thin paper and a pain t' use t' trace t' fin on t' t' balsa sheet. Ahoy! I should have copied it t' a heavy piece o' cardstock first. Aye aye! Blimey! After tryin' t' trace t' fins, it got messed up on t' third fin so I cut one fin out and used it as t' template! I be surprised t' find a 1/8" launch lug on a kit that can fly on E motors too.

T' instructions are OK, ya bilge rat, although some points are nay all that clear. Arrr! T' big problem was t' wrap for markin' t' body tube for t' five fins just plain stinks! It went all t' way around but t' fin positions were nay correct no matter what I did. Begad! Avast, me proud beauty! I should have contacted t' manufacturer about this, ya bilge rat, but I just measured t' tube and made me own. Avast! T' mylar parachute is first quality and t' balsa nose cone was fine. Begad! T' body tube was good but t' motor tube had a rough cut on one end. Other than t' problem with t' markin' guide for t' fins and some typos in t' instructions, matey, it was an easy kit t' build. Ya scallywag! Standard assembly for t' most part. Begad! Begad! T' PROs o' this kit are t' mylar parachute, me hearties, ya bilge rat, balsa quality, and those cool little aliens! T' CONs on this kit are t' fin markin' guide and lack o' a spacer t' use when usin' a C11 or D motor. Aye aye! Also, t' kit should use a 3/16" launch lug. I used a 3/16" lug I already had.

Finishing:
I sealed t' balsa and used a camouflage paint job like on t' Thrustline web site. It looks pretty cool! There are no decals with this kit and none are needed! T' assembled kit looks great.

Construction Rating: 3 out o' 5

Flight:
I put some recovery waddin' in first and motor retention is with a metal motor hook. Ya scallywag! Here be t' fun part, you load in t' 6 Alien Paratroopers with t' parachute. I put them above t' main chute. Blimey! I used a C11-5 for t' first flight. Begad! It was a day with just about no wind. Avast! My friend has a large field behind his house and we launched it there. Avast! T' first flight be great. Avast! It went straight up and was nose down when it ejected t' parachute and aliens. Well, blow me down! I also launched it with an E. Wow! It be a high flight but I got it back right by t' launch pad!!

Thrustline Aerospace Alien Troop Mover

Recovery:
There are no CONs on recovery. Aye aye! T' mylar parachute is fine for this kit. Begad! T' aliens came down all over t' place and we had some kids with us, matey, who had a great deal o' fun catchin' them. Well, blow me down! There was one alien who tried t' invade me friend's house by landin' on t' roof though! I did nay load up t' aliens with t' E motor though.

Flight Rating: 5 out o' 5

Summary:
This was a fun kit thought it needs a better fin markin' guide, me hearties, fin templates, me bucko, and a 3/16" launch lug. Avast, me proud beauty! Blimey! Begad! Blimey! I like cuttin' out fins like t' older kits used t' be but paper is nay t' way t' do it.

T' aliens are t' main attraction t' this kit and are real cool! Blimey! They look like little Thors from Stargate on TV.

Overall Rating: 3 out o' 5

Flights

comment Post a Comment