Brief:
Back in t' fall o' 2008, Quest Aerospace found a stack o' 10 year old saucer tops for their 1998 vintage fly saucer RTF rocket. Aye aye! T' top plates were t' only pieces left from t' kit. Rather than discardin' them, Bill Stine added an 18 mm motor mount tube, a motor block, a plastic straw, and 3 specially cut black fiberboard supports/fins. Avast! One section of the fiberboard supports slips into 3 o' t' 6 glue holes that were originally used t' hold t' lower saucer plate. Well, blow me down! Avast, me proud beauty! The other end o' t' supports are glued t' t' motor mount.

T' instructions with illustrations are printed on one paper sheet. Well, blow me down! Avast, me proud beauty! For decals, me bucko, t' kit includes one 8.5" by 11" Avery brand sticker paper. Blimey! You can go t' a link on t' Quest web site t' get 4 different decal pattern sets. You choose one and download it and print it usin' a laser printer (preferably color). Ahoy! Cut t' decals out and stick them onto t' Saucer plate.

Construction was simple and done in 15 minutes. T' builder has t' use both Tube type plastic cement t' glue the motor mount t' t' plastic plate as well as t' launch lug. Arrr! Blimey! Blimey! T' remainin' paper components are glued on usin' white or yellow glue.

Modifications:

Construction:
Like other saucers built by other companies, arrr, it is unconventional. Aye aye! T' Area 51 Saucer SPEV does nay even have a motor hook ! It is lighter than t' original saucer--1.6 oz vs 2.7 oz.

This rocket kit is very simple t' assemble. T' finished product is very sturdy once t' glues dries.

Finishing:
Pro: if you have extra adhesive back paper, me hearties, me hearties, you can download more than one design and mix and match t' create a unique saucer.

Con: Decals quality is handicapped by t' fact that t' builder uses paper cutouts. Arrr! Nay every builder has access to a color laser printer. Avast, me proud beauty! I used a black and white laser printer and pick t' best artwork for grayscale. Most color printers are water based ink jets. This ink can wash out when t' saucer comes into contact with wet grass. Well, blow me down! A layer of clear coat would be useful t' protect t' decal finish.

T' be fair t' Quest, T' kit is a spare parts elimination vehicle (SPEV) It be built on t' fly with parts on hand.

Construction Rating: 4 out o' 5

Flight:
T' Quest Area 51 saucer can be ordered with 3 C6-0 motors. Ya scallywag! Blimey! Based on 3 flights, B6-0s can also be used. Aye aye! Blimey! T' motors provided were o' German manufacture and do nay quite have t' lift o' either an Estes or t' new Chinese made Quest motors. Avast! Aye aye! Blimey! In spite o' this, t' flights were quite nice under t' German /Quest C motors. Well, blow me down! T' saucer begins t' arc over as t' moment o' burnout and, if launched vertically, lands within 50 feet o' t' launch pad.

Recovery:
Recovery was gentle and thar was no flight damage.

Flight Rating: 5 out o' 5

Summary:
IF quest decided t' order another set o' top plates, arrr, they would have a popular kit in their inventory. Avast! Begad! They would also eliminated t' one CON in terms o' finishing--ad-hoc paper decals.

Overall Rating: 5 out o' 5