Brief:
This V2 kit is a single deployment, parachute recovery kit with a 54mm mount. Begad! Well, me bucko, blow me down! T' rocket has a built in electronics bay accessed by a side hatch.

Construction:
T' kit came with everythin' you need t' complete except epoxy and a chute. Ya scallywag! It includes a 7.5" diameter body tube already glassed, a very nice fiber glass nose cone, slotted tail cone, me bucko, four 1/4" plywood fins with beveled leadin' edge, fiberglass cloth for reinforcement o' t' fins, 3 plywood centerin' rings, arrr, 1 nosecone bulkhead for recovery system mounts, me hearties, a 30" long 54mm motor tube, and a 7" long built-in plywood electronics compartment. T' kit also includes mountin' hardware for recovery system consistin' o' 2 U-bolts with washers and nuts and a tubular nylon strap. Aye aye! Rail buttons were a nice finishin' touch.

T' instructions were very clear and easy t' follow along with great pictures o' each step.

T' build was very easy other than t' fiberglassin' that is done in t' interior o' t' tail cone. It is kind o' hard t' get t' but t' instructions walk you through how t' make some simple tools t' get t' job done nicely. Avast, me proud beauty! Blimey! Blimey! Mine turned out great other than some sticky hands. Avast! Arrr! Blimey! T' kit is very large and you have t' sort o' wrestle t' parts around when settin' on t' fins but it worked out great.If you have never built a big kit like this make sure you always think big when mixin' up your epoxy, ya bilge rat, it takes plenty t' get it right.In t' end, arrr, shiver me timbers, everythin' aligned perfectly and seemed t' be very strong.

Finishing:
As you probably already know t' V2 really had no markings other than some interestin' paint schemes and great lines. Begad! I decided t' do mine with a version o' t' ragged camo as found on t' V2 reference guide scale info from Rocketry Online (ROL). Well, blow me down! After sandin' t' entire rocket and fillin' some small imperfections, I was ready for paint. I first painted 2 large sections o' t' rocket white. Aye aye! Then with 2" maskin' tape I carefully tore t' tape in half leavin' 2 ragged edge pieces that were then used t' mask out t' other colors. I did this with 3 colors: Krylon white, camo olive, matey, and camo tan. Avast, me proud beauty! Ya scallywag! With t' paint dry, t' entire rocket be wet sanded with 600 grit sandpaper before sprayin' it once more with satin clear coat t' give it that flat, matey, me hearties, no shine look. Ahoy! (I have t' confess I copied t' 10" V2 photo on t' Polecat website.) I finished it off with a 54mm Aero Pack retainer.

Construction Rating: 5 out o' 5

Flight:
Talkin' t' Andy at Polecat, shiver me timbers, he said t' rocket can be flown on anythin' from a J t' an M. Aye aye! I chose t' fly mine for t' first time on a Cesaroni Pro38 J285. Ahoy! I used t' Aero Pack 54-38 adapter that is really cool and works great with t' 54mm retainer.

I prepped t' V2 with a new 85" Sphereachute I picked up at t' factory and added a big piece o' Keelhaul®©™chute protector.

I used a Cannonball Works RRC²X 25K altimeter for one deployment charge at apogee and used motor deployment as a backup.

After makin' all t' appropriate calls t' set things up, ya bilge rat, we were off t' t' desert for a test flight o' t' V2.

We touched off on t' motor and t' V2 jumped t' t' sky like one o' its smaller cousins only a little slower. Begad! Very straight, slow, ya bilge rat, loud, arrr, matey, and awesome. Avast, me proud beauty! Ya scallywag! T' flight was perfect. Ya scallywag! Avast, me proud beauty! I can't wait t' try a K!

Recovery:
Deployment was perfect and t' big 85" Sphereachute brought it home without a scratch. Impressive flight! T' altimeter beeped out 1335 feet on a J285 with a 10.75 pound bird. Well, blow me down! Nay bad, Cesaroni!

Flight Rating: 5 out o' 5

Summary:
This kit be a lot o' fun t' build due t' its big size. Begad! T' part were all high quality and fit perfectly as intended. Aye aye! T' rocket is very strong and impressive lookin' as it sits on t' pad. Begad! Begad! As always though, me bucko, t' best part is lettin' it fly after you nervous finger touches t' button and everythin' works perfect. Blimey! You are rewarded for all t' work and time spent.

Overall Rating: 5 out o' 5