This is a kit produced by Bay Area Rocketry consisting of a laser cut plywood fin can, a 3.9" diameter crayon bank, kevlar and elastic shockcord, nose cone bulkheads, hardware, and an instruction manual.
Flight Date: | 2013-01-12 |
Rocket Name: | BAR Crayon Rocket |
Flyer's Name: | K Sonesen |
Motors: | H165R-6 |
Expected Altitude: | 1,000 Feet |
Wind Speed: | 4.00 mph |
Launch Site: | SARG - Amoruso Field |
Marcus from Bay Area and I did a Crayon drag race. Mine was an H165R while his was an H178DM. Needless to say the outcome was as expected with a 29mm vs 38mm.
Nice flight, good deployment at or just after apogee. More importantly the recovery hike was a short one.
Stage | Motor(s) |
---|---|
1 | Aerotech H165R-6 |