Estes A.R.V. Condor

Estes - A.R.V. Condor {Kit} (2075) [1993-2004]

Contributed by Andy Sola

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstar_borderstar_border
Overall Rating: starstarstarstarstar_border
Diameter: 0.98 inches
Manufacturer: Estes
Skill Level: 2
Style: Glider

Brief:
T' A.R.V Condor is a single staged rocket that is about 19 inches long. Blimey! . Blimey! At apogee, two drones detach for a glidin' return t' Earth. Booster returns on a streamer! Recommended motors are B4-2 (First Flight), me bucko, B6-2, arrr, me bucko, and C6-3.

Construction:
T' construction on this rocket wasn't as hard as I had thought it would be. Blimey! Blimey! After readin' all t' reviews I thought it would be impossible t' make especially because this was only me second rocket. Aye aye! If you follow t' directions and read ahead before doin' anythin' you will be pretty good in t' process. Avast! Blimey! Be careful when it says t' lift up a glider win' with a small body tube. Ahoy! Blimey! They mean t' white tube for t' glider, matey, nay t' small tube that is for t' booster. Begad! Arrr! Blimey! Also be very careful when alignin' t' fins.

I wasn't so serious so me rocket doesn't fly straight. Avast! T' one thin' that I think everyone should realize and do is that since thar be a part 1 and a part 2, me hearties, when somethin' from part 1 is drying, matey, you can go ahead and get somethin' done in part 2. Avast! You will finish t' rocket much faster that way. Begad! I didn't like t' idea o' t' nose cone bein' glued on t' t' body. Just remember t' use lots o' plastic cement because most cements aren't strong enough t' stand t' ejection o' these motors. Another thin' is that t' vac formed parts are said t' be glued by plastic cement. Ya scallywag! Do nay do that. I did that and it wasn't strong enough and me flight almost messed up. Avast! Use lots o' white glue instead. Arrr! Begad! It bonds better. Avast! For construction I would rate it as 4.

Finishing:
T' finishin' is nice and strait-forward. Arrr! I painted t' body and gliders tubes white, me hearties, and t' main nose cone and glider wings silver. Blimey! I thought completely white gliders looked too plain. Avast, me proud beauty! T' decals too are easy t' apply. Ya scallywag! Well, blow me down! Even though they are water slide, they aren't as hard as they seem. You just have t' dip them in water for a couple o' seconds and lay them down and wait. Arrr! I would prefer t' normal Estes decals because they have a stronger bond. Avast! Finishin' is a 5

Construction Rating: 4 out o' 5

Flight:
T' flight o' this rocket is pretty cool. PUT IN MORE THAN THREE SHEETS OF WADDING.

On me first flight I used an A8-3. Avast! Since me fins weren't aligned properly, it flew up and started turnin' downward. Ahoy! Since I had put in three sheets o' waddin' (which wasn't enough,) as t' instructions had said, t' ejection came up and melted me streamer, me hearties, me shock cord got burnt in half, t' plastic cement I used t' glue t' nose cone ignited, t' nose cone flew off, ya bilge rat, and luckily t' vac formed parts managed t' just hang on. Begad! Avast! T' good thin' is that me gliders did a good job. Arrr! They made-up for t' bad flight. Since me shock cord was broken and I only had half and hour o' repairin' time and overnight left t' dry until t' lift-off in front o' t' crowd, me bucko, I just made another mount and used t' remainin' shock cord. My second flight be better than me first. Begad! I used a B6-4 since I didn't have a B6-2. Begad! Aye aye! T' boost was nay straight again, matey, me bucko, t' motor ejected, but once again t' streamer didn't come out. Arrr! This time t' gliders were very sweet. Begad! I later found out that t' shock cord mount wasn't strong enough and it broke before t' streamers could come out. Aye aye! Ahoy! For Flight I would rate this a 4 1/2.

Recovery:
T' recovery system for this rocket needs improvement. Arrr! Begad! I think that t' shock cord they supplied wasn't good. Begad! It be nay very elastic. Ahoy! I should have replaced it with an elastic shock cord. It's nay just me rocket that didn't get its streamers deployed because o' t' shock cord. Aye aye! There were two people buildin' A.R.V Condors, me bucko and I. Well, blow me down! And none o' our streamers deployed. Avast! I am repairin' me rocket and puttin' in an elastic shock cord so t' streamers can hopefully deploy. Blimey! Because o' t' un-elastic shock cord, I rate recovery as a 3.

Flight Rating: 3 out o' 5

Summary:
Overall, arrr, shiver me timbers, me hearties, I like t' rocket very much. Blimey! Ya scallywag! It's t' most original rocket I have ever seen. Aye aye! Begad! It is great fun t' build, and fly. It's also a perfect grand finale in front o' a crowd. Begad! In conclusion I rate this kit 4. Arrr! If it had a better shock cord it would have been a 4/1/2 or even 5.

Overall Rating: 4 out o' 5

 

Other Reviews
  • Estes A.R.V. Condor By Chris Taylor Jr. (January 1, 2008)

    Parts and Supplies Hobby Knife, Sand Paper (220 grit), Glue (I used Thick CA), Ruler, Pen or Pencil, Desired paint etc.. Assembly Compare the parts in the box with the parts list in the instructions. Separate all balsa parts from balsa stock and sand trim as needed. Assemble wings, there are two and make sure you make a left and right for each wing set. You will use the included ...

  • Estes A.R.V. Condor By Hank Helmen

    Single stage piggy back boost launch glider design with two gliders. The glider's wings act as rocket fins during boost then separate using the ejection charge to deploy the gliders. The rocket booster body recovers with a streamer. The kit includes 4 body tubes. Two larger ones are for the booster and two smaller tubes for the glider fuselages. Also supplied are 3 plastic nose cones and ...

  • Estes A.R.V. Condor By Eric Miller

    I recently received an A. R. V. Condor as a gift from my wife. The A. R. V. Condor is an Estes Explorer series rocket (Intermediate level).   This kit was packaged in plastic and came in a box and was probably around $15. 99. All the parts were included and none were damaged.   The instructions were typical Estes and were excellent. The special feature of this rocket is at apogee ...

  • Estes A.R.V. Condor By Carl Tulanko

    The Estes Condor is a very slick kit which incorporates a sustainer with two gliders attached to the sides. The glider's airfoils act as fins for the model during boost and detach at ejection, then each glider spirals in for a landing while the main sustainer lands with the aid of a streamer. USAF insignia helps dress up this little beauty and makes it a esthetically pleasing kit to launch or ...

Flights

comment Post a Comment