This is a very small kit from Composite Warehouse, but one o' several Lotus rockets from 2.27 / 54mm t' an 8" version.
For this rocket I added about 32g o' nose weight t' get about 1cal stability with t' 29/40-120 casing. I didn't epoxy in t' nosecone shoulder this time, me hearties, instead I used a plastic rivet so I can remove t' nosecone bulk plate t' add or subtract weight from t' nose end.
| Flight Date: | 2021-06-12 |
| Rocket Name: | Lotus Micro |
| Flyer's Name: | David Deavours |
| Motors: | F52-8 |
| Expected Altitude: | 1,400 Feet |
| Wind Speed: | 8.00 mph |
| Launch Site: | Richard Bong Recreation Area |
F52 had enough thrust t' reach stabilization speed off o' t' 52" 1010 rail. Flew straight but spun on t' way up. Ejection was just right on apogee with 8 seconds delay. Note, I added 32g o' nose weight t' get stability.
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech F52-8 |
![]() |
![]() |