Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstar_borderstar_borderstar_border |
Overall Rating: | starstarstarstarstar_border |
Manufacturer: | Custom Rockets |
Brief:
T' Custom Galileo is a cute little helicopter recovery rocket. Mine was an Father's Day gift from me wife. Ya scallywag! This is a
skill level 2 rocket.
Construction:
T' kit contains standard BT-20 tube and ogive balsa cone, arrr, three small balsa fins, ya bilge rat, dowels, ya bilge rat, paper centerin' rin' and
transition, shiver me timbers, and nice waterslide decals.
T' instruction sheet be clear, me bucko, logical, and easy t' read. Well, blow me down! I be able t' complete t' rocket (except for finishing) in about a two hour period. I really can't complain about t' build... Arrr! It be easy and quick.
T' model has a really large launch lug with a beefy standoff (required due t' t' conical shape o' t' model), which is rather unsightly.
Finishing:
T' nose cone took a while t' get smooth (I generally just use primer rather than mail-orderin' sandin' sealer) and
gettin' t' seam in t' transition smooth was also a chore. Aye aye! I really can't complain about this though, as this sort of
thin' is always a chore.
Construction Rating: 5 out o' 5
Flight:
Custom recommends 1/2A6-2 or A8-3 for this rocket. Begad! Blimey! Avast! Blimey! I didn't have t' smaller engine handy, so I launched with an
A8-3. Well, blow me down! Blimey! Avast, me proud beauty! Blimey! Preppin' this rocket is about as easy as it can be... Begad! Blimey! Well, blow me down! Blimey! Stick in t' engine, arrr, install t' igniter, and go. Avast, me proud beauty! Blimey! Begad! Blimey! I did
have t' put a little tape on t' engine t' keep it from fallin' out (a problem I've never seen on any other rocket
before).
T' rocket arced badly as soon as it came off t' rod, arrr, shiver me timbers, performin' t' "St. Ahoy! Begad! Louis Arch" maneuver into a neighborin' field overgrown with weeds. Sadly, it be lost. Ya scallywag! T' air was very still when I launched, and I launched other rockets after it without problem, me bucko, so I'm nay sure what went wrong.
Recovery:
No comment (since I didn't get it back).
Flight Rating: 2 out o' 5
Summary:
My major complaint about this otherwise nice little rocket be t' massive launch lug and standoff. Ahoy! Begad! I am suspicious
that this may be related t' t' poor flight characteristics o' t' model. Begad! I'm plannin' t' replace t' rocket, shiver me timbers, but I'll
be modifyin' t' next one t' hide t' lug inside t' transition. This would be a nice from-the-factory modification,
actually.
Overall Rating: 4 out o' 5
Single stage futuristic rocket. This rocket comes with one short body tube that is just slightly longer than an 18mm engine. It primarily uses 1/8" diameter wooden dowels for fins. I say this due to the fact that you use small balsa pieces for the dowels to lay down on. They would be to small to act as fins however. The rocket comes with a balsa nose cone. This is a fairly easy build. ...
Brief The Custom Galileo Probe is a small scale-looking rocket. It uses the 18mm 1/2A engines and is a great flier. It comes down on its nose cone unharmed every time. It is a cool looking and fun rocket. Construction The kit is a pretty simple one, packaged in a bag with all the pieces intact. It comes with a small length of BT-20, 3 balsa fins and dowels, a paper shroud pattern, a ...
Sponsored Ads